Hoses are divided into two types, lined and unlined. Lined fire hose including cotton, nylon rubber lining with water,
Polyester Glue with glue, plastic water with linen. Unlined water with cotton water, linen water, ramie water. By bear labor
For pressure into 0.8MPa, 1.0MPa, 1.3MPa, 1.6MPa, 2.0MPA, 2.5MPA six categories. Press straight
Path is divided into 50 (2 inches), 65 (2.5 inches), 80 (3 inches), 100 (4 inches) four categories. Divided by weaving
Plain water and twill water with two types. The length of each water band is generally specified as 20 meters. Lined with water pressure, resistance
Wear, mold rot, durable, and not easy to leak, resistance is small, but also arbitrary bending folding, free to move, use
Convenient, suitable for external fire laying and connected fire engines.
Weifang Changsheng Plastic Co., Ltd. is a professional enterprise of plastic products and plastic machinery. It covers an area of 30000 square meters. Company owns a modernized workshop with more than 20 production lines and complete testing equipment.
For many years, we committed to the improvement of production process and innovation of products, as well as the increasing various of products to meet the demand of market. Rely on the premium quality, advanced technology, standard manage and quality control system, we build long-term cooperation relationship with clients over 20 countries.
As an OEM manufacturer, we can supply products as customers' requirement. We sincerely welcome the domestic and foreign friends to visit us.
At present, we supply a variety of PVC hose including
Steel wire and fiber reinforced flexible PVC hose
PVC garden hose
PVC spray hose
High pressure air hose
PVC gas hose
PVC shower hose
Single wallclear pvc hose
PVC suction hose
welding hose
Layflat hose
1. Laying should avoid sudden twists and turns, in order to prevent the ability to reduce water pressure; also should avoid twisting, in order to prevent the water hose after filling the water buckle to make the buckle hooked off the interface.
2. After watering should avoid forced drag on the ground, you need to change the position to try to lift the move to reduce water and ground wear.
3. Should avoid contact with oil, acid, alkali and other corrosive chemicals.
4. In areas where there may be flames or intense radiant heat, cotton or linen water should be used.
5. After use should be cleaned, unlined water to hang the sun, dry coil stored in a cool dry place.
6. If any damaged holes are found in the process of application, apply a water tape to wrap tightly and then weave or make up as soon as possible after the application. When there is obvious damage, immediately withdraw from combat readiness.
7. Vehicles need to pass through the laying of the water, should be in advance through the site to install the water bridge.
8. When laying through the railway, should pass under the rails.
9. Lining water should be used outside the building in cold areas to prevent the water from freezing.
