Features: Transparent, non-toxic, tasteless, pressure, tensile, corrosion-resistant, anti-aging, beautiful appearance, soft and light. Tube surface can increase the color line mark, more beautiful.
Weifang Changsheng Plastic Co., Ltd. is a professional enterprise of plastic products and plastic machinery. It covers an area of 30000 square meters. Company owns a modernized workshop with more than 20 production lines and complete testing equipment.
For many years, we committed to the improvement of production process and innovation of products, as well as the increasing various of products to meet the demand of market. Rely on the premium quality, advanced technology, standard manage and quality control system, we build long-term cooperation relationship with clients over 20 countries.
As an OEM manufacturer, we can supply products as customers' requirement. We sincerely welcome the domestic and foreign friends to visit us.
detail:
Plastic pipe production line failure: Cutting meter length is not accurate
Check if the counting wheel is tight or not; check whether the counting wheel is oscillating and tighten the length measuring wheel bracket fixing bolts; check whether the rotary switch of the cutting machine is damaged; check whether the rotary encoder is damaged; whether the rotary encoder is welded or not (PE terminal) should be guided to the ground to a total grounding reliably grounded, and the grounding point should meet the grounding requirements of electrical grounding pile, not allowed to stand-alone shell (PE terminal) Ground in series, or interference pulse will be introduced, causing the cutting length is not allowed;
11. Plastic pipe production line failure: co-extruded identification of the problem
Co-extruded identification of Article proliferation: generally due to improper use of co-extrusion users choose should be used PE and other special materials, if necessary, can reduce the extrusion section temperature;
Co-extruded bar can not squeeze out: the main extruder downtime, first open the coextrusion machine, open the coextrusion machine about 10 minutes and then open the host;
Co-extrusion labels too thin or too wide: the general is due to co-extrusion machine and the amount of tubing does not match the speed of traction should be adjusted co-extruder frequency or change the traction speed to match the speed of the two; followed by the co-extrusion Machine cooling section of the cooling water jacket did not turn cooling water reasons;
Pipe production line in the actual production process will appear in other anomalies, according to the actual situation even if the deal.
